12V, 5 meter IP20 2835 White High Output LED Strip - 120 LEDs/m (Strip Only)

Here is the High Intensity LED Strip that you were waiting for! The 2835 LED Strip offers 120 LED lights per meter for a total of 600 lights per  5m length. It has a brightness of 3200lm per meter and a beam angle of 120 degrees. It is versatile and can be cut at every 3 LED lights (approximately 3 cm). To fit with your existing décor, Cool White (4000 to 5000k).

The 2835 LED Strip with 120 LED per meter requires a power supply of 9.6w per meter and can be dimmed with a dimmable power supply or with a compatible low voltage dimmer. 

This incredible power generates a brightness like no others which allows a continuous LED lightning with no hot spots when the strip is installed on aluminum profiles specially made for this type of effect.  Imagine your guests’ reaction when they will see this thin lightning bar that has a lighting similar to a neon!
Like every high intensity strip, the 2835 LED Strip must have adequate heat dissipation to ensure its performance and durability. Trying to install this LED Strip on an improper surface will permanently damage it. You should install the 2835 LED Strip in a compatible aluminium profile.

This IP20 LED Strip does not offer any water protection. Moreover, no connectors are available for this type of strip. Because of its high intensity, you have to install 18 gauge  wire if you want to make connections on LED strips. Unable to solder your Strip ? You can also buy easy to connectors with out soldering .see our Easy connectors for strip lights.  

IP20 LED Strip with 3M adhesive
For indoor use only with heat dissipation
5 meter Strip, 120 LED per meter, 600 LED lights total
Length: 5m, Width: 10mm,
Required Power: 12V,9.6 per meter
Recommended Power: 12V, 12 per meter
LED Type: 2835 SMD 
Can be cut: Every 3 LED 
Luminous flux: 3200lm/m
Color Temperature (KELVIN): COOL WHITE OR WARM WHITE